Bio-rad ChromLab™ Software Instrukcja Użytkownika Pobierz pdf (Strona 67)

Connecting Peripheral Equipment

Installation Guide | 6 5

5. To connect an air sensor to a system pump:

a. Connect tubing from the buffer bottle or from the outlet port on the one of

the buf

fer inlet valves to one port on the air sensor.

b. Connect tubing from the other port on the air sensor to the inlet port on the

corr

esponding system pump.

6. To connect air sensors to the buffer blending valve:

a. Connect tubing from each buffer bottle to one port on each air sensor that

will be used.

b. Connect tubing from the other port on each air sensor to the inlet ports on

the buf

fer blending valve.

Alternatively you can attach tubing from the outlets A and B of the buffer

blending valve to the top of the air sensors. Connect the ports fr

om the bottom

of each air sensor to the inlets of system pumps A and B, respectively. In this

setup, although the air will be prevented from entering the system pumps and

the system will react to end of buffer, the system will not distinguish which of

the four ports needs replenishing.

To activate the air sensors

1. Start ChromLab.

The green LEDs on the air sensor module should turn on.

2. Select File > System Settings to open the System Settings dialog box.

3. Select the Air Sensors tab.

By default, only the air sensors that the system detects are enabled. The other

sensors ar

e disabled.

4. For each air sensor that you want activate, select its checkbox and from its

opdown list choose either Sample to detect end of sample or Buffer to detect

end of buffer.

5. Click OK.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 177 178

Brak uwag

Bio-rad ChromLab™ Software Instrukcja Użytkownika Strona 67